What does the April 2018 software update contain?

Optimizing your customer experience and improving our product is at the heart of our concerns. That's why an update is available.

This update includes the optimization of the battery life of your Keecker. 

Now, when you turn off the projector, it will go into sleep mode after 1 minute of inactivity. 

When you turn the projector back on after one minute of inactivity, the LED will turn blue and the projector will turn back on after 7 seconds.

If your Keecker's battery is less than 15%, the projector will not turn on again and the LED will flash blue. We therefore invite you to recharge it.

This evolution allows to preserve the battery of your Keecker and ensures you approximately 30 hours of autonomy without projection.

To install the update:

  1. Switch your Keecker off and on again, the update will be automatically proposed to you after downloading (a message will confirm the update) OR if you don't turn off your Keecker, in the projected menu, go to Settings>About>System update
  2. Make sure you have the latest version of the application on your smartphone (on the Play Store or App Store).
Downloading the update can take about 15 minutes. Keecker must have a minimum of 25% battery to download the update. We recommend that you download the update when your Keecker is on his charging station. The Keecker should not be turned off while he is being updated.
Have more questions? Submit a request